MENU

AskIFAS Powered by EDIS

Energy Efficient Homes: Introduction to LED Lighting

Barbara Haldeman, Wendell A. Porter, Kathleen C. Ruppert, and Randall A. Cantrell
LED lightbulb.
Figure 1. LED lightbulb.
Credit: lovelyday12 / iStock / Getty Images Plus

Quick Facts

  • LED lights are very small, extremely durable, and can be manufactured in a variety of colors and forms.
    • They have the potential to be more energy efficient and last much longer than most current lighting technologies.
    • They are considered environmentally friendly since they contain no mercury, and the visible light applications for home or business do not emit infrared (IR) or ultraviolet (UV) light.
    • They produce very little heat, and their lifetime is not affected by frequent on/off switching.
    • The cost of materials needed to manufacture LED lighting has substantially decreased in the past several years. Although LEDs remain more expensive than their counterparts, their prices continue to steadily decline.

Terms to Help You Get Started

  • LED: light emitting diode.
    • SSL: Solid state lighting, a general term for semiconductors that convert electricity into light.
    • Semiconductors: Solid materials that possess electrical conductivity.
    • Diode: A simple semiconductor device.
    • CFL: Compact fluorescent lamp (lamp is the lighting industry's term for bulb).
    • CRI: Color rendering index, a measure of how a standard series of colors appears under a light source, compared to a reference light source (daylight or incandescent light); CRI is measured on a scale of 0 to 100, with 100 being identical to the reference light source.
    • CCT: Correlated Color Temperature, a measure of the color appearance of a light source; CCT is measured in degrees Kelvin (K), the absolute temperature scale; white light products commonly range from warm white (2,700K) to cool white (5,000K).
    • RGB: Red-Green-Blue, the three primary colors of light.
    • White light: Not an actual color, but rather a combination of all wavelengths in the visible spectrum of light.

What are LEDs?

Light emitting diodes (LEDs) are part of a class of lighting called solid state lighting (SSL). Unlike incandescent or compact fluorescent lamps (CFLs), LEDs are small electronic components that convert electricity into light. Organic light-emitting diodes (OLEDs) and light-emitting polymers (LEPs) are also forms of SSL (ENERGY STAR, n.d.-d).

LEDs are used in a variety of applications:

  • Status lights on electronic devices of all kinds
  • Screens on cell phones, computers, and flat-panel televisions
  • Flashlights
  • Decorative lighting strings (both indoor and outdoor)
  • Auto headlamps
  • Traffic lights
  • Outdoor lighting fixtures for homes, parking lots, streets, and parks
  • Architectural lighting
  • Retail display lighting
  • Desk and task lights
  • All home lighting applications

LED applications allow for extraordinary flexibility in lighting design with regard to color, brightness, size, shape, and distribution. There is even a fabric with solid state lighting incorporated into the weave—allowing for items such as T-shirts with designs that change shape and color, sofas in airline terminals with a digital clock displayed across its cushions, etc.

However, in terms of general lighting—that is, general illumination using white light—quality and efficiency can vary greatly from product to product. The U.S. Department of Energy (DOE) lists several reasons.

  • The technology is different: Because LEDs are completely different from traditional lighting sources, standards and testing procedures were implemented by the ENERGY STAR program (a collaborative effort of the U.S. Department of Energy and the Environmental Protection Agency) in June 2008 in the interest of making it easier for consumers to compare products.
  • Everyone is learning: Because LEDs can be sensitive to some thermal and electrical conditions, manufacturers are in a process to develop fixtures or components that are LED compatible in multiple applications.

Ongoing research in LED lighting is happening all around the world. Governments and private industry are extremely interested in LEDs both because of their adaptability in design and the potential energy savings that LED lighting offers. According to the US DOE, "Lighting accounts for about 15 percent of global energy consumption. To put this into perspective, in a home... 15 percent is more energy than your refrigerator, dishwasher, and clothes washer uses combined!" LED lighting has the potential to change home, office, retail, and architectural lighting—and that includes general white-light illumination.

If you are interested in the history of the discovery and development of LEDs and OLEDs, visit http://edisontechcenter.org/LED.html.

How do they work?

LEDs differ from traditional light sources in the way they produce light. In an incandescent lamp, a tungsten filament is heated by electric current until it glows, emitting visible light. In a fluorescent lamp, an electric current causes the gas inside the tube to emit ultraviolet (UV) radiation, which strikes the phosphor coating on the inside of the glass, causing it to emit visible light.

An LED, on the other hand, is a semiconductor diode, a device that allows current to flow in only one direction. It's made of a chip of semiconducting material. When current is applied,  energy is released in the form of light that is emitted by the LED. Depending on the alloy used to make the semiconductor, the light emitted by the LED can range through the colors of the rainbow: red, orange, yellow, green, and blue. White light is created by combining the light from red, green, and blue (RGB) LEDs, or by coating or shielding a blue LED with yellow phosphor.

For explanation on how LEDs or OLEDs work, watch the video at http://edisontechcenter.org/LED.html.

How does the light produced by LEDs compare to that of Incandescents and CFLs?

White light is a combination of all wavelengths in the visible spectrum. Incandescent lamps inherently produce white light; LEDs do not. They emit light in a very narrow range of the spectrum, producing nearly monochromatic light—the color depending on the materials used to create the LED. White light LEDs are created in two different ways: phosphor conversion or RGB. In phosphor conversion, a blue LED is coated with a yellow phosphor or the phosphor coating is bonded to a substrate that is at a distance from the LED, resulting in light that appears white to the eye. This method is lower in cost than the RGB approach. Phosphor-converted chips are manufactured in large quantities in forms that are integrated into lighting fixtures.

In the RGB method, white light is produced by mixing the light from multiple red, green, and blue LEDs; sometimes amber is added to enhance the quality of the light. This results in great flexibility in the possible "shades" of white light produced, but is technically more demanding to manufacture. RGB systems are generally found in custom-designed architectural, home, retail, theater, and medical lighting. Remote controls and smart-phone apps are available to adjust the color scheme to fit the environment.

Before the 1990s, white light through diode phosphor-conversion or RGB method was not possible. The invention of efficient blue light-emitting diodes in the early 1990s by Isamu Akasaki, Hiroshi Amano, and Shuji Nakamura won them the Nobel Prize in Physics in 2014 and enabled the creation of bright and energy-saving white light sources (Nobelprize.org, 2014).

Light quality is indicated by two measurements, correlated color temperature (CCT) and the color rendering index (CRI).

CCT is that aspect of light that people refer to when they talk about cold fluorescent lighting; such lighting has a high CCT. CCT is measured in Kelvins; cool white light is 5,000K, while warm white light has a low CCT at about 2,700K. 

The CRI is a measure of how color appears when illuminated by a light source compared to reference sources such as incandescent light or daylight. A CRI of 100 is identical to the reference source, so the higher the CRI the better. Everyone has experienced the dull colors and washed-out faces resulting from old-style fluorescent tube lighting, which had a CRI ranging from 50 to 60. Phosphor-converted warm white LEDs are produced that claim to have a CRI of 80, a value most people find quite acceptable.

To create more consistency of light quality in the manufacture of LEDs, a process called binning is used. In the production of LEDs, a single round wafer is coated with various materials to create the semiconductor which forms the blue LED. This is then sliced into extremely small rectangles (die). Electrical connections are inserted, and the phosphor is added as a coating or on a shield. The coating processes (die and phosphor) create significant variations that impact the lumens, color temperature, and voltage of the LEDs. LED manufacturers sort their production into lumen, color, and sometimes voltage bins (binning). This allows luminaire manufacturers to select only those LEDs that meet their acceptable performance ranges while maximizing the usage of each of the bin ranges for the LED supplier.

The CRI has been found to be inaccurate for white light RGB LEDs, and there is controversy in the industry as to the reliability of the rating for other lighting types as well, so a new measurement system began development and was conducted on color quality (CQS) and the CQS using the spectrally tunable lighting facility (NIST, 2016).

In terms of illumination, "LEDs are 'directional' light sources, which means they emit light in a specific direction, unlike incandescent and compact fluorescent bulbs, which emit light and heat in all directions. For this reason, LED lighting is able to use light and energy more efficiently in many applications. However, it also means that sophisticated engineering is needed to produce an LED light bulb that shines light all around like an incandescent A-shape bulb" (ENERGY STAR, n.d.-d).

Are they energy efficient?

It depends. The best white light LED lamps can meet or exceed the efficiency of compact fluorescent lamps—but many LEDs currently on the market do not. LEDs are sensitive to temperature and electrical conditions, and LED fixtures must be designed carefully to take this into account. According to ENERGY STAR, "Thermal management is probably the single most important factor in the successful performance of an LED product over its lifetime because the higher the temperature at which the LEDs are operated, the more quickly the light will degrade, and the shorter the useful life will be" (ENERGY STAR, n.d.-d).

However, research and development in this area are very active, and more efficient LED devices are appearing on the market every day. Luminaires are manufactured with the LEDs already installed as an integral part of the device, a practical approach because thermal management is addressed and incorporated into the luminaire design, ensuring the long life that can be attained with LED diodes. ENERGY STAR states that "all LED products that have earned the ENERGY STAR label or rating have been tested to ensure that they properly manage the heat so that the light output is properly maintained through the end of its rated life" (ENERGY STAR, n.d.-d).

The U.S. Department of Energy estimates that the energy efficiency of LEDs already rivals the most efficient white light sources.

Why choose ENERGY STAR?

The ENERGY STAR label on SSL luminaires provides consumers with the confidence that these products meet efficiency and performance criteria established by DOE in collaboration with industry stakeholders. The ENERGY STAR SSL program went into effect on September 30, 2008, and the ENERGY STAR Lamps Version 1.1 specification took effect September 30, 2014 (ENERGY STAR, n.d.-c).

ENERGY STAR is focusing on lighting applications and products for which the technology has advanced to a point where performance is equal to or better than traditional efficient lighting technologies based on light output, luminaire efficacy, and cost. Visit the ENERGY STAR website for LED-certified bulbs and luminaries at https://www.energystar.gov/productfinder/product/certified-light-bulbs/results and https://www.energystar.gov/productfinder/product/certified-light-fixtures/results.

For more information, see the Building Technologies Program site at https://www.energy.gov/eere/ssl/solid-state-lighting.

Looking Forward

Exciting research in SSLs is ongoing worldwide through industry, research, and educational institutions. Light extraction is an important factor in SSL manufacturing, and nanotechnology has been at the forefront of creating new materials and structures to improve brightness.

Besides providing bright, energy-efficient lighting for the average home occupant, the LED lamp holds great promise for increasing the quality of life for more than 1.5 billion people around the world who lack access to electricity grids for their homes. Due to low power requirements, LED lighting can be powered by local solar power or a battery. Simple LED lights can replace the kerosene lamp, which in turn eliminates expensive fuel costs and the health hazard of kerosene's toxic fumes. The web article provided online at https://phys.org/news/2014-04-homemade-solar-lamp-countries.html by École Polytechnique Fédérale de Lausanne about a social startup LEDsafari is a good example of providing people with hands-on education to create their own LED lights from materials at hand—such as a wire, phone battery, LED, or empty bottle (Carron, 2014).

Summary

Today, consumers can comparison shop for LED white lights the way they now do for incandescent and compact fluorescent lights, choosing the lamps and fixtures that give them the combination of light quality and energy efficiency they're looking for. LEDs are already available for multiple applications in and around the home—from landscape and walkway lighting to holiday lighting to everyday home lighting, and even ambient lighting in hard-to-reach places where the long life of LEDs is a real asset.

References and Resources

Carron, Cécilia. (2014, April 14). A Homemade Solar Lamp for Developing Countries. Retrieved November 28, 2023 from https://phys.org/news/2014-04-homemade-solar-lamp-countries.html

Edison Tech Center (n.d.). The Electric Light, LEDs, and OLEDS. Retrieved November 28, 2023 from http://edisontechcenter.org/LED.html

Energy.gov (n.d.-a). LED Lighting. Retrieved November 28, 2023 from https://www.energy.gov/energysaver/led-lighting

Energy.gov (n.d.-b). Solid State Lighting. Retrieved November 28, 2023 from https://www.energy.gov/eere/ssl/solid-state-lighting

Energy Star. (n.d.-a). Energy Star Certified Light Bulbs. Retrieved November 28, 2023 from https://www.energystar.gov/productfinder/product/certified-light-bulbs/results

Energy Star. (n.d.-b). Energy Star Certified Light Fixtures. Retrieved November 28, 2023 from https://www.energystar.gov/productfinder/product/certified-light-fixtures/results

Energy Star. (n.d.-c). ENERGY STAR Program Requirements for Lamps (Light Bulbs) Partner Commitments. Retrieved November 28, 2023 from https://www.energystar.gov/sites/default/files/ENERGY%20STAR%20Lamps%20V1%201_Specification.pdf

Energy Star. (n.d.-d). Learn about LED Bulbs. Retrieved  November 28, 2023 from https://www.energystar.gov/products/lighting_fans/light_bulbs/learn_about_led_bulbs#what_are_leds_how_they_work

Energy Star (n.d.-e). Solid State Lighting Luminaires. Retrieved November 28, 2023 from https://www.energystar.gov/products/spec/solid_state_lighting_luminaires_specification_version_1_2_pd

Lighting Design Lab. (n.d.). Introduction to LED Lighting. Retrieved November 28, 2023 from https://www.lightingdesignlab.com/resources/articles/articles-lighting-technology/introduction-leds

Lighting Research Center. (n.d.). LEDs. Retrieved November 28, 2023 from https://www.lrc.rpi.edu

NIST Physical Measurement Laboratory. (2016, August 25). Color Rendering of Light Sources. Retrieved November 28, 2023 from https://www.nist.gov/pml/sensor-science/optical-radiation/color-rendering-light-sources

Nobelprize.org. (2014). The Nobel Prize in Physics 2014. Retrieved November 28, 2023 from https://www.nobelprize.org/prizes/physics/2014/summary/

Publication #FCS3280

Release Date:February 14, 2024

Related Experts

Cantrell, Randall A.

Specialist/SSA/RSA

University of Florida

Haldeman, Barbara M.

University of Florida

Related Topics

Fact Sheet
Homeowner

About this Publication

This document is FCS3280, one of a series of the Family Youth and Community Sciences Department, UF/IFAS Extension. Original publication date June 2008. Revised July 2015, August 2019, and November 2023. Visit the EDIS website at https://edis.ifas.ufl.edu for the currently supported version of this publication. This material was prepared with the support of the Department of Environmental Protection, Florida Energy Office. However, any opinions, findings, conclusions, or recommendations expressed herein are those of the author(s) and do not necessarily reflect the views of the Florida Department of Environmental Protection.

About the Authors

Barbara Haldeman, academic assistant, Program for Resource Efficient Communities; Wendell A. Porter, lecturer and P.E., Department of Agricultural and Biological Engineering; Kathleen C. Ruppert, retired associate Extension scientist, Program for Resource Efficient Communities; Revised by Randall A. Cantrell, assistant professor, Department of Family, Youth and Community Sciences; UF/IFAS Extension, Gainesville, FL 32611.

Contacts

  • Randall Cantrell
thumbnail for publication: Energy Efficient Homes: Introduction to LED Lighting