AskIFAS Powered by EDIS

Eucommia ulmoides: Hardy Rubber Tree1

Edward F. Gilman and Dennis G. Watson 2


If you want green leaves on a tree during a severe drought, this is your tree! This little-known but urban-tough, very attractive, 40- to 60-foot-high, slow-growing, deciduous tree has a dense, symmetrical oval to rounded crown and low-branched silhouette, making it ideal for use as a specimen, shade or street tree. The thin, 3- to 8-inch-long, glossy, dark green leaves are almost totally resistant to pests and disease and remain an attractive dark green throughout the summer, changing only to a paler green before dropping in early fall. The foliage is quite striking and appears to glimmer in the moonlight or when lit from above. Branches ascend forming an upright silhouette in winter. The inconspicuous blooms are followed by the production of small, 1.5-inch-long, flat, winged seeds. Only one or two corrective prunings at an early age normally is all that is needed to develop good structure in the crown.

Figure 1. Middle-aged Eucommia ulmoides: Hardy Rubber Tree
Figure 1.  Middle-aged Eucommia ulmoides: Hardy Rubber Tree

General Information

Scientific name: Eucommia ulmoides
Pronunciation: yoo-KOM-ee-uh ul-MOY-deez
Common name(s): Hardy rubber tree
Family: Eucommiaceae
USDA hardiness zones: 4B through 7B (Fig. 2)
Origin: not native to North America
Invasive potential: little invasive potential
Uses: specimen; shade; street without sidewalk; screen; parking lot island < 100 sq ft; parking lot island 100–200 sq ft; parking lot island > 200 sq ft; sidewalk cutout (tree pit); tree lawn 3–4 feet wide; tree lawn 4–6 feet wide; tree lawn > 6 ft wide; urban tolerant; highway median; container or planter
Availability: not native to North America

Figure 2. Range
Figure 2.  Range


Height: 40 to 60 feet
Spread: 25 to 35 feet
Crown uniformity: symmetrical
Crown shape: round, spreading
Crown density: dense
Growth rate: slow
Texture: medium


Leaf arrangement: alternate (Fig. 3)
Leaf type: simple
Leaf margin: serrate
Leaf shape: elliptic (oval), ovate, oblong
Leaf venation: pinnate
Leaf type and persistence: deciduous
Leaf blade length: 2 to 4 inches, 4 to 8 inches
Leaf color: green
Fall color: no color change
Fall characteristic: not showy

Figure 3. Foliage
Figure 3.  Foliage


Flower color: brown
Flower characteristics: not showy


Fruit shape: oval
Fruit length: 1 to 3 inches
Fruit covering: fleshy
Fruit color: unknown
Fruit characteristics: does not attract wildlife; not showy; fruit/leaves not a litter problem

Trunk and Branches

Trunk/bark/branches: branches don't droop; showy; typically one trunk; thorns
Pruning requirement: needed for strong structure
Breakage: resistant
Current year twig color: brown
Current year twig thickness: medium, thick
Wood specific gravity: unknown


Light requirement: full sun
Soil tolerances: clay; sand; loam; alkaline; acidic; well-drained
Drought tolerance: high
Aerosol salt tolerance: moderate


Roots: not a problem
Winter interest: yes
Outstanding tree: yes
Ozone sensitivity: unknown
Verticillium wilt susceptibility: unknown
Pest resistance: free of serious pests and diseases

Use and Management

The Chinese have used the hardy rubber tree for more than 2,000 years for its medicinal value. Trees there rarely reach a mature size since they are harvested regularly and stripped of their ridged or furrowed, grey/brown bark. Hardy rubber tree may be the only tree which grows in cold climates from which a rubber product can be obtained. This rubbery substance is visible as thin strands which bridge two sections of a torn leaf.

Hardy rubber tree should be grown in full sun on moist soil but when well-established tolerates extensive drought. Trees have been growing in parts of North Carolina for many years without irrigation and have survived extreme drought in very poor, clay soil in the full sun. But they grow slowly. They should be grown and tried more often in urban areas such as in highway medians, along streets and as a medium-sized shade tree. Growth rate appears to be quite slow but could probably be improved with adequate irrigation. The tree is adapted to high soil pH.

Propagation is by seed or cuttings.

Pests and Diseases

Amazingly free of any problems but do not plant it in poorly-drained soil.


1. This document is ENH399, one of a series of the Environmental Horticulture Department, UF/IFAS Extension. Original publication date November 1993. Revised December 2006. Reviewed February 2014. Visit the EDIS website at
2. Edward F. Gilman, professor, Environmental Horticulture Department; and Dennis G. Watson, former associate professor, Agricultural Engineering Department, UF/IFAS Extension, Gainesville FL 32611.

Publication #ENH399

Release Date:May 4, 2015

Related Collections

Part of Southern Trees Fact Sheets

    Organism ID


    • Michael Andreu